|
EH-OP30
16 Line x 40 Character LCD
Full-Graphic 320x240 Pixel Resolution
Graphics capable
The EH-OP30 fulfills the
need for a powerful yet cost effective operator interface
system. Displays are sixteen lines of a pixel based LCD in
passive 16 color. These pixel addressable displays allow
graphic capabilities with our Designer for Windows software
package. Each line can contain up to 40 characters. Each
page can contain up to 32 lines. These lines can be accessed
by scrolling with the arrow keys. Brightness control is
provided to adjust the display for easy viewing under nearly
any condition.
Display Variables
PLC internal variables can be
shown on any of the many display pages. The number of
variables that can be viewed at one time is limited only by
the display size. UniOP also provides scaling (linear
conversion) of the displayed data. The final value can then
be shown in several useful formats including barograph,
date, time, decimal, bit, hexadecimal, floating point, and
string. Data entry with valid range verification is also
available for each data type.
Data Entry
The integral ASCII keypad
offers 56 programmable keys and 24 user-definable LEDs.
UniOP also features an internal battery-backed real time
clock. Time and date information from the clock are
periodically updated in the PLC to enable processing based
on time-of-day, day-of-week or any other period.
Alarms
UniOP can monitor and display
up to 1024 alarms. Attributes and unique messages for each
alarm can be defined. Operator acknowledgment can also be
required. The last 1024 alarm events detected by the UniOP
are retained in an internal event list. This list can be
viewed on screen or printed on a serial printer to obtain a
permanent record.
Security
An eight-level password
protection scheme protects critical system features from
undesired access.
Adaptability
Custom display screens are
developed using the UniOP Designer™ for Windows™ programming
software. Your completed project file can be downloaded to
the display through the serial port and permanently stored
on a SSFDC memory card.
Graphic Capabilities
The EH-OP30 allows you to
display bitmap graphics. These bitmap graphics can be
created with any Windows™ based software package capable of
BMP format.
Keyboard Macro Editor
A feature allowing you to
configure your keys to do a variety of functions locally in
the UniOP. For example: turning pages, setting attributes,
setting LEDs, writing to PLC, going to alarm list, uploading
or downloading a recipe set and many more. This can save
many hours of ladder logic programming.
Recipes
This feature allows you to
create a recipe with up to 255 parameter sets for each page
of the project file. UniOP has a total of 32K reserved for
recipe storage. You can upload or download a parameter set
from or to the PLC. Once a parameter set has been downloaded
to the PLC, the data contained within the parameter set can
be modified.
UniNET Network
The UniNET network allows the
user to design a network in many different ways for use of
several UniOP panels with several PLCs. This way data can be
written to or retrieved from the PLCs in many different
locations at one time. The UniNET network creates a bridge
between UniOP panels which allows data to be shared by all
PLCs in the network, regardless of the type or manufacturer.
EH-OP05 Features
NEMA 4/12 compliant enclosure
CE approved
UniNET network capabilities
Keyboard Macro
Editor
Recipe configuration
One RS-232 / RS-422 /
RS-485 / 20mA current loop serial port, speeds up to 38,400
baud for direct PLC connection
One RS -232 port for PC or
printer communications
One auxiliary port for high speed
bus network communications
Real time clock with battery
back-up
2 MB SSFDC memory card
Optional 2 MB memory
upgrade (4 MB total memory)
Unlimited number of variables
per page
1024 prioritized alarms
Historical event list
(last 256 events)
Eight-level password protection
Print reports, alarm list, and event list to serial printer
Displays ASCII standard character set
Graphics capable
EH-OP05 Specifications
Physical Dimensions
Cutout Width and Height
Schematic
Cutout Depth 74mm (2.9")
Front Panel Thickness (max.) 5 mm (0.20")
Face-plate Height 220 mm (8.50")
Face-plate Width 275 mm (10.83")
Weight 1.9 kg (4.2 lb)
Environment
Operating Temperature 0 to 50o
C (32 to 122o F)
Humidity 0 to 95% RH (non-condensing)
Power Requirements 24 VDC, 600 mA maximum
Display
Type Passive Color STN
Size 16 lines x 40 characters/line
Diagonal Size 5.6 in
Character height 5.15 mm (13/64 inch)
Warranty
All products are warranted for
one year against defects in material and workmanship.
|
