|
EH-OP20
16 Line x 40 Character LCD
Full-Graphic 320x240 Pixel Resolution
Graphics capable
The BKDR-46 fulfills the need for a powerful yet
cost effective operator interface system. Displays are with sixteen lines of
a pixel based backlit LCD. These pixel addressable displays allow graphic capabilities
with our Designer for Windows software package. Each line can contain up to
40 characters. Each page can contain up to 32 lines. These lines can be accessed
by scrolling with the arrow keys. Brightness control is provided to adjust the
display for easy viewing under nearly any condition.
Display Variables
PLC internal variables can be shown on any of the many display pages. The number
of variables that can be viewed at one time is limited only by the display size.
UniOP also provides scaling (linear conversion) of the displayed data. The final
value can then be shown in several useful formats including barograph, date,
time, decimal, bit, hexadecimal, floating point, and string. Data entry with
valid range verification is also available for each data type.
Data Entry
The integral ASCII keypad offers 56 programmable keys and 24 user-definable
LEDs. UniOP also features an internal battery-backed real time clock. Time and
date information from the clock are periodically updated in the PLC to enable
processing based on time-of-day, day-of-week or any other period.
Alarms
UniOP can monitor and display up to 1024 alarms. Attributes and unique messages
for each alarm can be defined. Operator acknowledgment can also be required.
The last 1024 alarm events detected by the UniOP are retained in an internal
event list. This list can be viewed on screen or printed on a serial printer
to obtain a permanent record.
Security
An eight-level password protection scheme protects critical system features
from undesired access.
Adaptability
Custom display screens are developed using the UniOP Designer™ for Windows™
programming software. Your completed project file can be downloaded to the display
through the serial port and permanently stored on a SSFDC memory card.
Graphic Capabilities
The BKDR-46 allows you to display bitmap graphics. These bitmap graphics can
be created with any Windows™ based software package capable of BMP format.
Keyboard Macro Editor
A feature allowing you to configure your keys to do a variety of functions
locally in the UniOP. For example: turning pages, setting attributes, setting
LEDs, writing to the PLC, going to alarm list, uploading or downloading a recipe
set and many more. This can save many hours of ladder logic programming.
Recipes
This feature allows you to create a recipe with up to 255 parameter sets for
each page of the project file. UniOP has a total of 32K reserved for recipe
storage. You can upload or download a parameter set from or to the PLC. Once
a parameter set has been downloaded to the PLC, the data contained within the
parameter set can be modified.
UniNET Network
The UniNET network allows the user to design a network in many different ways
for use of several UniOP panels with several PLCs. This way data can be written
to or retrieved from the PLCs in many different locations at one time. The UniNET
network creates a bridge between UniOP panels which allows data to be shared
by all PLCs in the network, regardless of the type or manufacturer.
EH-OP05 Features
NEMA 4/12 compliant enclosure
CE approved
UniNET network capabilities
Keyboard Macro Editor
Recipe configuration
One RS-232 / RS-422 / RS-485 / 20mA current loop serial port, speeds up to
38,400 baud for direct PLC connection
One RS -232 port for PC or printer communications
One auxiliary port for high speed bus network communications
Real time clock with battery back-up
2 MB SSFDC memory card
Optional 2 MB memory upgrade (4 MB total memory)
Unlimited number of variables per page
1024 prioritized alarms
Historical event list (last 256 events)
Eight-level password protection
Print reports, alarm list, and event list to serial printer
Displays ASCII standard character set
Graphics capable
EH-OP05 Specifications
Physical Dimensions
Cutout Width and Height Schematic
Cutout Depth 74mm (2.9")
Front Panel Thickness (max.) 5 mm (0.20")
Face-plate Height 220 mm (8.50")
Face-plate Width 275 mm (10.83")
Weight 1.9 kg (4.2 lb)
Environment
Operating Temperature 0 to 50o C (32 to 122o F)
Humidity 0 to 95% RH (non-condensing)
Power Requirements 24 VDC, 600 mA maximum
Display
Type Liquid Crystal
Size 16 lines x 40 characters/line
Diagonal Size 5.6 in
Character height 5.15 mm (13/64 inch)
Warranty
All products are warranted for one year against defects in material
and workmanship.
|
